Click here to view full size image
| |
77 Pioneer SX1010 Stereo receiver 110 WPC Monster Powerhouse sold
Here we have a classic monster vintage receiver by Pioneer made in Japan. This 1977 Pioneer sx1010 is a large & heavy classic stereo receiver with a HUGE 110 Watts Per Channel of RMS power with exceptional high sound quality with extremely low harmonic distortion. This Pioneer SX-1010 was the top model receiver at the time and is still considered among the best sounding of the vintage Pioneer receivers. The receiver is in very good - excellent vintage condition and excellent working condition. The cabinetry woodwork as you may guess from its age has been lovingly restored by sanding off old finish and refinishing the wood with a Brazilian Rosewood finish topped by 12 coats of nitrocellulose lacquer instrument lacquer... she's ready to grace your living room now with vintage style... She's a real beauty just have a good look at all the pics to decide for yourself. This receiver has been serviced it the past 3 years, calibrated, also had the controls and switches cleaned and lubricated. The receiver has been fully tested and all functions & lights are in excellent working order. The output has also been balanced and biased. This receiver has the classic looking silver brushed aluminum faceplate with metal knobs & levers , large blue lighted tuning scale, color source indicators, and nice great looking walnut wood veneer cabinet now looks like Brazilian Rosewood finish. All dial lamp indicators are in working condition. Power output is a booming 110 Watts RMS per Channel @ 8 Ohms which is actually underrated. This is a great receiver to connect a Phono turntable or CD player and even an IPOD or listen to the AM/FM stereo radio. The is the receiver that has a high quality very sensitive AM-FM tuning radio section and this units radio section is in excellent working condition. This receiver can handle down to 4 Ohm speakers so a wide variety of speakers can be used and 3 pairs of speakers can be connected. The receiver has excellent tonal control with stepped Treble & Bass controls and a Loudness switch to boost frequency range at low volume. There are inputs for Phono 1&2, Tape 1, Tape 2, and AUX and the Tape and AUX inputs can be used for CD or DVD analog. There are Main Amp IN and Preamp Out connects so these sections can be used separately if desired. The receiver has been thoroughly cleaned and the faceplate & knobs were hand polished. The faceplate is in good condition with only a few small nicks and some light use wear. The black top grill is in very good original condition. The rear panel is very good as well and all connects and the AM antenna are in excellent condition. overall rating is WoW!...Great booming bass & articulate clear highs this is one amazing sounding powerhouse. Get that live band sound with true fidelity... we recommend you use a great set of speakers for this amp to drive to get that live sound.
OK JUST THE STATS:
Pioneer SX-1010
Specifications:
Power Output: 110 watts per channel RMS into 8 ohms, 110 watts into 4 ohms.
Harmonic Distortion: Less than 0.1%
Intermodulation Distortion: Less than 0.1%
Damping Factor: >30classicaudio.com
Hum and Noise: >-110dB
Frequency Response: 7Hz to 100kHz
FM Sensitivity: 1.7uV
FM Signal to Noise Ratio: 72dB
IF Rejection: 110dB
Spurious Rejection: 110dB
Harmonic Distortion Mono: <0.2%
Harmonic Distortion Stereo: <0.3%
Stereo Separation: 40dB
Controls:
Bass 50Hz +/-5dB
Bass 100Hz +/-10dB
Treble 10kHz +/-10dB
Treble 20kHz+/-5dB
Balance
Volume
Switches (Toggle):
Power
Tone Off
Tape Duplicate
Tape Monitor 1
Tape Monitor 2
Adaptor 4-CH
Adaptor Dolby NR
Switches (Push):
Spkr-A
Spkr-B
Spkr-C
Low Cut
High Cut
-20dB
AM
FM
Phono 1
Phono 2
Mic
Aux
Mono
Loudness
Dimmer: Bright
FM Muting Off
Jacks:
Mic-L
Mic-R
Headphones 1
Headphones 2
Indicators:
Signal Strength Meter
Tuning Meter
STEREO
SP-A
SP-B
SP-C
LOW
HIGH
-20dB
AM
FM
PH-1
PH-2
MIC
AUX
MONO
LOUD
Rear Panel:
AC Outlet Unswitched (2)
AC Outlet Switchedched
Phono 1 (L, R)
Phono 2 (L, R)
Aux Input (L, R)
Tape Monitor 1 Rec (L, R)
Tape Monitor 1 PB (L, R)
Tape Monitor 2 Rec (L, R,)
Tape Monitor 2 PB (L, R, DIN)
Pre-Out (L, R)
Power-In (L, R)
4-CH MPX Output
Adapter 4-CH Out (L, R)
Adapter 4-CH In (L, R)
Adapter Dolby NR Out (L, R)
Adapter Dolby NR In (L, R)
Speaker System A (L, R)
Speaker System B (L, R)
Speaker System C (L, R)
HERE is a link to more pictures.... https://picasaweb.google.com/gr8bids/PioneerSX1010MonsterReceiver?authkey=Gv1sRgCMnDoear1tnDOg#slideshow/5618598640146836146
|
